PARAFFIN OIL FOR SAUNAS BELINKA 0.5L

Belinka Oil Paraffin is used to protect wooden elements in saunas. It increases resistance to dirt and moisture. It is suitable for protecting all types of wood.

- colorless impregnation
- for protecting wooden elements in saunas
- does not dry out, is colorless, odorless and tasteless

Belinka Oil Paraffin does not form a protective layer on the surface, so it is recommended to check and renew the coated surfaces with the same product regularly. The required treatment intervals depend on the type of wood, mechanical stress and exposure to moisture. It is recommended to refresh the surface several times a year with the same product.

Usage: Before applying to wooden surfaces free from grease, wax and other contaminants. Before application, the wooden surface must be clean, finely sanded and free from dust. Apply the oil generously to a dry surface with a cloth, brush or roller. Before applying the oil, the wood must be thoroughly dried, properly sanded and free from dust, otherwise the protection is not adequate. After approx. 30 minutes, wipe off excess oil with a clean absorbent cloth or blotting paper, and then wipe the surface with a dry cloth. It is not recommended to apply this product at temperatures below 15 °C and in humid weather. Clean tools immediately after use with water and detergent, or Belsol.

Technical data:

Composition: tung oil.

Cost: 60–100 ml/m2 depending on the type, absorbency and primary treatment of the wood.

Drying: 24 hours (under normal conditions, T = 20 °C, relative air humidity 65%). Drying time increases at lower temperatures.

Cleaning the tools: with water and detergent or with Belsol.

Storage: in the original sealed packaging at a temperature between 5 and 30 °C.

Packaging: 0.5 l