PAINT FOR METAL 180ML. BRONZE SILICONE

Anticorrosive silicone lacquer paint, dissolved in an organic solvent, highly resistant, suitable for exterior metal surfaces. It has high hardness without the need to add a hardener, high opacity, and a gloss that remains unchanged over time. The colour of the paint's various shades remains unaffected by unfavourable atmospheric conditions and by washing. It is applied easily, spreads excellently, and any type of alkyd or acrylic lacquer paint can be painted over it.

• Silicone lacquer paint
• Maximum hardness
• High resistance
• Surface drying time: 2-3h
• Solvent thinning ratio 5%
• Coverage 13-15 m2/lt
• Application by brush, roller, spray gun

SHADES
Available in colours: white, black and cypress (for glossy and satin finish surfaces), in gold, bronze and silver (for glossy finish surfaces), as well as in an unlimited range of shades using the tinting system for machine colouring.

SURFACE PREPARATION
Surfaces must be cleaned with brush-application thinner Τ 300, be dry and smooth, free of dust or grease, and sanded with suitable sandpaper.
Metal surfaces are primed with anticorrosive primer.
Glossy metal surfaces are primed with primer for glossy surfaces.

APPLICATION
Before use, the product must be stirred thoroughly. Apply in two coats, by roller or brush, thinned 5% with brush-application thinner Τ 300, or by spray gun, thinned 5% with spray-gun thinner Τ 350. The product should not be applied at temperatures below 5°C, above 35°C and/or at relative humidity above 80%.
The applied layer is dry to touch in 2-3 hours. The next coat can be applied after 16-18 hours. The given times vary depending on atmospheric conditions (relative humidity and temperature). Surfaces coated with Heavy Metal Silicon lacquer paint may be washed after 30 days from its application.
Rollers, brushes and stains of the material on floor coverings are cleaned with brush-application thinner Τ 300, and then washed with soap or detergent. Spray guns are cleaned with spray-gun thinner Т 350.