PAINT FOR BATHROOMS AND KITCHEN WHITE 750 ML.

Thanks to its special formulation, Kitchen & Bath emulsion paint effectively prevents the development of mould and mildew on the paint film. The paint is suitable for painting interior surfaces of rooms exposed to high humidity and fumes, such as kitchens, bathrooms, ceilings, cellars and others. It provides high opacity, low consumption and excellent whiteness. It spreads excellently, forming a smooth matt surface. It can be applied to suitably prepared surfaces of any material.

• Protection against mould, mildew and others
• For rooms with high humidity and fumes.
• High opacity
• Surface drying time 30-60 min
• Dilution ratio with water 10%
• Consumption 11-13m2/lt
• Application by brush, roller, spray gun

SURFACE PREPARATION:
Surfaces must be clean, dry and smooth, free of dust, grease or friable materials.
Acrylic building filler is used to fill holes and smooth cracks.
Old surfaces covered with lean paints (with lime or adhesive paints) are primed with Acrylan Unco Eco or Durovit.
New surfaces of plaster, concrete, brick, plasterboard and others, as well as filled surfaces, are primed with 100% Acrylic primer.

APPLICATION:
Before use, the product must be stirred thoroughly. It is applied in two coats with a brush, roller or spray gun, diluted up to 10% with water. The product must not be applied at temperatures below 5°C, above 35°C and/or at relative humidity above 80%.
The applied layer is dry to the touch in 30-60 minutes. The next coat can be applied after 3-4 hours. The given times vary depending on atmospheric conditions (relative humidity and temperature).
Surfaces painted with Vitex Kitchen & Bath may be washed with water at the earliest three weeks after painting, using a soft sponge, and in case of stubborn stains washed with a neutral colourless cleaning agent.
Tools are cleaned immediately after use with water and, if necessary, washed with soap or a cleaning agent.