iPhone 12 Pro Max LCD Display + Touch Unit Diagnostic Soft OLED

Replacement OLED display with touch screen.

If your display is damaged from a fall, scratched, or otherwise harmed, this display is the ideal choice for replacement.

Specifications:

• Display type: Soft OLED
• IC technology: COF
• Resolution: 2778*1284
• Colour temperature (K): 6500-8000K
• Brightness: 650 (±50) nits
• True Tone support
• Haptic Touch
• 360° polarised viewing
• Support for HDR for vivid colours and details
• Display size: 6.7
• Refresh rate (Hz): 60Hz
• Precise touch response
• Perfect workmanship and assembly
• The LCD display already has an IC installed, so the part can be diagnosed immediately
• 30% lower power consumption
• significantly increased resistance to damage

This part can perform self-diagnosis, simply follow these steps:

1) Click "Restart and finish repair"

2) then click "Continue"

3) Connect to a WiFi network

4) Agree that the company Apple collects diagnostic data.

5) Wait for the configuration to finish

6) Click "Continue"

7) Wait for the next configuration to finish

8) Then everything is ready

The LCD display will not appear as unknown.

Entrust the installation to an authorised service centre

Warning:

Pay attention to antistatic protection:

Work on an antistatic mat and, if necessary, use an antistatic wrist strap.

Make sure all parts that may be susceptible to static electricity are properly protected with antistatic tape.

Test the LCD display properly before installation (touch screen function, colours, brightness, sensor function, correctness of pixel display)

Carry out the installation with the battery disconnected and make sure the connectors are properly connected to each other; after installation, check again.

https://support.apple.com/en-euro/docs