FILTER REGULATOR 1/2'' FRL 200 GAV

The device improves the efficiency of pneumatic tools by ensuring a constant and adequate supply of air pressure. Protects pneumatic tools by reducing moisture ingress and providing automatic lubrication, reducing wear and corrosion. Increases the life of pneumatic tools by effectively removing moisture and proper lubrication.
Reduces the need for tool maintenance and repair, resulting in time and operating cost savings.
The compressor reducer filter 3/8" and 1/2" M-F with lubricator and pressure gauge is a basic module for compressed air systems.
This integrated module not only reduces the air pressure from the compressor to adapt it to the specific needs of the pneumatic tools, but also removes moisture from the air and ensures proper lubrication. This results in more efficient operation and a longer life for the pneumatic tools.
The reducer filter is designed to withstand pressures up to 16 bar and maximum temperatures of 60 degrees Celsius, with a flow rate of 450 liters per minute, making it suitable for various industrial and workshop applications.

Recommendations for use:
Regularly check that the gear filter setting is adjusted according to the specifications of the tools used.
Make sure the filter connection is compatible with the compressor inlets and instrumentation.
Install in an accessible location to facilitate maintenance and inspection of the equipment.
Clean the filter periodically to prevent clogging and maintain filtration and lubrication efficiency.
Check the pressure gauge regularly to make sure it is showing accurate readings and there are no leaks.

Maintenance recommendations:
Drain the filter regularly to remove accumulated water and prevent corrosion damage.
Replace the filter element according to the manufacturer's recommendations or when a significant drop in performance is observed.
Check and replace the seals and gaskets on the filter and lubricator to prevent air leaks.