Skip to content

Ermenrich NetGeeks cable length tester NL80

SKU DGT0492008

Избери период за изплащане и виж месечната вноска

Месечна вноска Обща сума за плащане ГПР Лихва Банка

Description

The Ermenrich NetGeeks NL80 cable length tester can measure cable lengths up to 1000 metres, and it also has other features. It can check cables for breaks and short circuits, as well as split, crossed and reversed pairs. It can also measure the distance to break and short-circuit points. The Ermenrich NetGeeks NL80 can trace cables, detect cables connected to a router or switch among many others, perform PoE and PING tests, and save the results to a memory card.

The cable length tester supports various cable types: STP/UTP (CAT5E, CAT6, CAT6A, CAT7) network cables, telephone cables, coaxial cables, plain wires. Its operating method is based on the TDR technique (time-domain reflectometry for measuring time characteristics). The results are very accurate and there is an option to calibrate the device. The device is resistant to crosstalk.

All included devices are powered by rechargeable batteries. The transmitter can operate for about 20 hours on a single charge, and the receiver for 50 hours. It has an automatic shut-off function.

Main features:

  • Tracing and checking various types of cables: network, coaxial, telephone, etc.
  • The technology is reflectometry for measuring time characteristics (TDR)
  • Maximum measured distance – 1000 metres
  • Detecting a cable in a cable bundle, tracing a cable connected to a switch/router by locating a port with a blinking indicator
  • Wire mapping: short circuits, crossed pairs, breaks
  • Measuring the distance to the location of breaks and short circuits
  • PoE and PING tests, automatic IP address assignment, saving data to a memory card

The kit includes:

  • Transmitter
  • Receiver
  • Remote unit
  • Connecting cable RJ11
  • Connecting cable RJ45
  • Crocodile clip
  • DC cable
  • MicroUSB cable
  • Carrying bag
  • Memory card
  • User manual and warranty card

Specifications

Warranty 5 years
Packaging size (L x W x H) 21x24x8 cm
Shipping weight 0.815 kg
Ports BNC, RJ11, RJ45, microUSB
Cable types for tracing STP/UTP (CAT5E, CAT6, CAT6A, CAT7) network cables, coaxial cable, plain wires, telephone cable
Cable types for checking STP/UTP (CAT5E, CAT6, CAT6A, CAT7) network cables, coaxial cable, plain wires, telephone cable
Cable length measurement yes
Cable checking yes, + (breaks, short circuits, crossed, reversed and split pairs, crosstalk)
Port flash function yes, +
Cable tracing yes
Crosstalk protection yes
PoE test yes
PING test yes
Measurement method time-domain reflectometry for measuring time characteristics (TDR)
Measurement units metres/yards, feet
Measuring range, m 0 — 1000
Error 3 (±0.5 m)
Measuring the distance to the break location yes
Measuring the distance to the short-circuit location yes
Calibration +
Minimum calibration cable length, m 20 (a 50 m cable is recommended)
Calibration error, % 2 (±0.5 m)
Maximum operating current, mA <100
Protection input voltage: 48 V, current: 5 mA
Data transfer +, up to 50 memory slots (*.txt format)
Display liquid crystal display, colour
Display diagonal, inches 2.8
Display resolution, pixels 320x240
Display backlight yes
Power supply 3.7 V, 1800 mAh, charging via a DC adapter 5 V, 1 A (not included) and microUSB cable (included)
Battery life, hours 50
"Low battery" status indicator yes
Automatic power-off 120 min, 15 min, 30 min, 60 min
Operating temperature range, °C −10… +60
Operating humidity range, % 20…70
Adjustable sensitivity yes
Non-contact voltage detection (NCV) yes
Flashlight yes

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare