Skip to content

Epoxy grout mix MULTIFILL-EPOXY THIXO ISOMAT light grey

by ISOMAT
SKU DGT0496484

Избери период за изплащане и виж месечната вноска

Месечна вноска Обща сума за плащане ГПР Лихва Банка

Description

Epoxy grouting compound

ISOMAT MULTIFILL-EPOXY THIXO epoxy grouting compound, light grey, 3 kg

Chemically resistant grout for bathrooms, swimming pools and professional kitchens, which also works as an adhesive for floor tiles.

ISOMAT MULTIFILL-EPOXY THIXO is a two-component solvent-free epoxy grouting compound in light grey, supplied in a 3 kg pack (A+B). It fills horizontal and vertical joints 1.5-10 mm wide and is also applied as a tile adhesive. It is classified as an R2 type adhesive under EN 12004 and an RG type grouting compound under EN 13888.

Устойчивост на киселини, основи и солена вода

Resistance to acids, alkalis and salt water

The hardened grout withstands diluted acids, sodium hydroxide, cleaning agents, chlorine and sea water without changing the surface. For this reason the compound is used in breweries, slaughterhouses, dairies, laboratories and swimming pools. Water absorption after 240 min remains below 0.1 g, which stops contaminants from penetrating the joint.

Strength for heavy-traffic areas

Compressive strength exceeds 45 N/mm² and flexural strength 30 N/mm², with abrasion resistance below 250 mm³. The floor can be partially used after 48 h and takes full load after 7 days at +23 °C. The working temperature range is from -30 °C to +80 °C, including regular cleaning with hot water.

Ready-made mixing ratio and 45 minutes working time

Component B is packed in the packaging of component A in the exact ratio 100:6.5 by weight, so on-site dosing is unnecessary. Mixing takes about 5 minutes with a low-speed mixer at 300 rpm. Cleaning the tiles is carried out within the same 45 minutes with a damp hard sponge.

Thixotropic consistency for vertical joints

The consistency holds the material in wall joints without sagging, and the reduced slip is part of the R2 classification under EN 12004. Shrinkage on drying remains below 1.5 mm/m and the joint keeps its flatness. The surfaces are suitable for direct contact with food products according to W-347, EPA 330.5 and EPA 110.2.

Specifications

Basic

ISOMATBrand
MULTIFILL-EPOXY THIXOModel
249492Article No.
Two-component epoxy resin, solvent-freeType
Light greyColour
R2 under EN 12004; RG under EN 13888; CE markingClassification

Application

1.5-10 mmJoint width
100:6.5 by weight (A:B)Mixing ratio
~45 min at +23 °CPot life
+10 °CMinimum application temperature
after 16 h at +23 °CWalkability
after 48 h at +23 °CPartial load
after 7 days at +23 °CFull load
0.2-5.0 kg/m²Consumption rate

Technical data

> 45 N/mm²Compressive strength
> 30 N/mm²Flexural strength
> 2.0 N/mm² (after 7 days)Shear bond strength
< 250 mm³Abrasion resistance
< 0.1 gWater absorption after 240 min
< 1.5 mm/mShrinkage on drying
1.55 kg/l at +23 °CDensity (A+B)
from -30 °C to +80 °CWorking temperature
Class EReaction to fire
Class A+ (French VOC regulation); max. 350 g/lVOC emissions

Packaging and storage

3 kg (A+B)Packaging
24 months in unopened packagingShelf life
from +5 °C to +35 °CStorage temperature

Basic

5204856422299EAN

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare