DECKING OIL 2.5 L.

Protective oil – wood impregnator, modified with polyurethane, enriched with wax. It penetrates deep into the wood's pores, prevents water from entering it, and at the same time highlights the natural beauty of the wooden surface. High resistance to adverse climatic conditions and loads.

• Surface drying time: 2-3h
• Consumption: 14-16m2/l
• Application: brush, roller, spray gun

Instructions for use

Surfaces must be clean and dry, free of resins, grease or residues of old varnish.

Application: 

Before use, the product must be stirred thoroughly. Apply one coat with a brush or cloth, without dilution. Excess material is wiped off after 5 minutes with a dry cloth.
A second coat is applied if the wood is very hard, or if the wooden surface is exposed to strongly adverse climatic conditions. The product should not be applied at temperatures below 5°C, above 35°C and/or at relative humidity above 80%.
The applied layer is dry to the touch in 2-3 hours. The next coat can be applied after 2 days. The given times vary depending on atmospheric conditions (relative humidity and temperature).
Rollers, brushes and stains of the material on floor coverings are cleaned with solvent for brush work Τ 300, and then washed with soap or detergent.