Description
WORKING PRINCIPLE:
The device uses a combined effect of ultrasound and a flash lamp to achieve high efficiency in the fight against enemies. Ultrasonic waves are inaudible to humans and large animals, but have a strong effect on rodents. The flashing light has an additional effect and increases the effect of the ultrasonic waves.
The effect of ultrasound and flashing light disrupts the vital functions of rodents and causes panic among them. They stop feeding and breeding and subsequently leave the protected area. The shape and frequency of the emitted pulses are constantly changing to avoid rodents getting used to them. The device reduces the density of some harmful insects - ants, bedbugs, spiders.
INSTRUCTIONS FOR USE:
Plug the device into a 220V power supply near the protected area. The indicator lights light up sequentially, which is an indication of the device's operation. Choose one of the two operating modes - ultrasound only or ultrasound + flash lamp. To achieve maximum effect, leave the device running constantly. Keep the device away from water and direct sunlight.
PREVENTIVE MEASURES:
What favors the appearance of rodents is open food and food waste. Collect food products and throw away waste. Good household hygiene and enemies rarely go together. It is a good idea to provide exits from the premises before using the device. This will speed up the effect. After the rodents leave, close all entrances and seal the holes in the walls and floor. Good prevention speeds up and increases the effect of the ultrasonic rodent control device.
FLASHLIGHT:
It has an additional repellent effect against rodents and some insects.
- Move the switch up to turn on the flashlight;
- Move the switch down to turn off the flash light;
ATTENTION:
- Do not place obstacles in front of the device - this greatly reduces the effect;
- The presence of soft objects in the room (upholstered furniture, carpets, etc.) reduces efficiency by 30-50%. In this case, it is advisable to place another device in the room;
- The effect of the device's operation is only evident in the room it is operating in. If you wish to protect other rooms, you must install one device in each of them.
EXPECTED EFFECT:
The initial effect of the device's operation appears after 10-12 days, and the maximum effect is achieved after about a week. During this period, you will probably notice increased activity of rodents. This is normal - under the influence of ultrasound and flashing light, they leave their hiding places, and subsequently the premises. After that, the rodents disappear almost completely. The use of additional means (traps, baits, etc.) during this period gives a very high effect.
TECHNICAL DATA:
Supply voltage: 220V/50Hz
Power consumption: 7W
Effective area: 160m 2
Operating frequency: 20 - 36 kHz