Boiler TEDAN Digital Pro INOX 80 liters, vertical, stainless, 3 kW

Technical specifications:

• Water tank made of high-quality alloy stainless steel EN1.4401 brand with a thickness of 1.2 mm to 1.8 mm, tested at 12 Bar pressure.
• Nominal capacity: 80 liters.
• The stainless steel we use in Tedan water heaters is from proven manufacturers and of the highest quality.
• Thermal insulation made of CFC-free polyurethane foam with a thickness of 25 to 49 mm (manufactured by Bayer - Germany).
• Precise temperature control
• Thermostat with frost protection (manufactured by Thermowatt – Italy)
• Maximum operating temperature up to 72°C.
• Magnesium anode with up to 50% longer life, which can be dismantled and subsequently replaced.
• Elliptical flange for higher reliability and security of the appliance.
• Water heater protection class IP: X4.
• Pipe diameter (Plumbing) 1/2".
• Distance between the holes of the mounting bracket (mm): 140-340

Characteristics

• Vertical installation
• Volume L 80
• Water tank material stainless steel / inox
• Heater type nickel-plated
• Heater power W 3000
• Number of mounting brackets 2
• Operating voltage V ~ 220 - 230
• Power supply single-phase
• Thermostat yes
• Maximum working pressure bar 6
• Type of insulation CFC-free polyurethane foam
• Insulation thickness mm 25 - 49
• Number of thermostats 2
• Pressure regulator yes
• Operation indicator light yes
• Anode tester no
• Protection magnesium anode
• IP X4
• Frost protection yes
• Safety valve yes, in the appliance packaging
• Height cm 82.5
• Diameter cm 45.4
• Weight (with packaging) kg 20.3
• Energy class C
• Load profile M
• Annual energy consumption 1429 kWh

Warranty : 120 months