ARMORALL HEADLIGHT RESTORER Headlight polishing kit

With the Armor All® Headlight Restoration Kit, all you need are 2 wipes and 10 minutes to restore your headlights to like-new condition. No need for sandpaper or tools. One kit cleans two headlights. Wipe 1 – Cleaning wipe – removes oxidation. Wipe 2 – Protective wipe – seals the headlight with a UV protective coating. STEP 1: Oxidation removal wipe. NOTE: The wipe will evaporate very quickly. Do not open the wipe until you are ready to restore the headlights, and work very quickly while cleaning. The active ingredients will evaporate within 3–5 minutes of opening the packet. Park the vehicle in a cool, shaded area before treatment. Ensure the headlight is clean and dry. Open the "STEP 1 CLEANING" packet and remove the wipe. Keep the wipe folded to reduce evaporation. Rub the headlights with even pressure in a back-and-forth horizontal motion. You will notice oxidation residue beginning to be removed. Turn the wipe to a clean side, keeping the folded shape. Continue rubbing, turning the wipe to a clean section until no residue is visible on the wipe. Discard the wipe. NOTE: Although your headlight may look clean, additional deep cleaning may be necessary to ensure all oxidation is removed. Repeat steps 1–5 for the other headlight. STEP 2: UV sealant protection wipe. Ensure both headlights have been cleaned with the oxidation removal wipe and that the surface is dry before applying the sealant. For best results, first wipe the surface with a clean, lint-free cloth. Open the "STEP 2 PROTECTION" packet and remove the wipe. Apply to the surface of the headlight by wiping in one direction, similar to applying a coat of paint. Repeat for the second headlight. One wipe should cover two headlights. Allow the surface to dry completely. The surface will be dry to the touch after about 3 hours. Do not touch the surface and avoid contact with water until it is dry.