Kiva furniture varnish, semi-matt – non-yellowing, water-based acrylic varnish for interior use. Can be tinted.
Recommended use: Furniture such as tables, chairs, bookcases and others, toys, panelling, wooden ceilings, doors and similar wooden surfaces. It is also suitable for protective varnishing of painted and stained surfaces.
For wooden surfaces in dry interior rooms, according to the instructions. Not suitable for treating floors.
Colour shades: Can be tinted according to the Tikkurila colours catalogue.
Gloss level: Semi-matt
Coverage: 8–14 m²/l. The actual spreading rate depends on the type, porosity and hardness of the wood.
Application method: Brush, roller or spray.
Drying time: Dust-free after approximately 1/2 hour. For sanding and recoating after 2-3 hours. Ready for use the next day.
The varnished surface reaches its final hardness after approximately two weeks. Avoid loads, cleaning and placing sticky and hot objects on the varnished surface during this time.
Advantages
• Good levelling – Kiva 30 semi-matt varnish has good adhesion to the original surface, resulting in a smooth and even coating. The varnish levels well and a flat surface is achieved.
• Rich range of colours – Kiva 30 can be tinted in a wide range of colours from Tikkurila's interior stains and varnishes. The new Timeless translucent colour collection of wood stains offers a great variety of inspiring shades to highlight the beauty of wood. The acrylic varnish remains transparent and shows beautiful wood texture.
• Durable surface – Clear or tinted Kiva 30 varnish creates a beautiful semi-matt surface that is durable and withstands heavy wear. It is a well-levelling varnish for protecting furniture and wooden surfaces indoors, such as tables, chairs, bookcases, panelled walls, cladding, doors and other similar surfaces.
APPLICATION INSTRUCTIONS
Application conditions
The surface to be varnished should be dry, the ambient temperature should be at least +10°C and the relative air humidity 30–80%.
Surface preparation
1. New wooden surfaces: Clean the wooden surface of any dirt and dust. Lightly dampen the surface with water, allow it to dry and remove loose wood fibres by sanding. Remove the sanding dust.
2. Previously varnished surfaces: Wash the surface with Maalipesu cleaning agent and rinse carefully with water. Dull the surface. If the varnished surface is in very poor condition, remove it completely with paint stripper or by sanding. Treat as a new wooden surface.
Varnishing
Stir the Kiva varnish thoroughly from the bottom of the packaging before and occasionally during use. Thin with water if necessary. Apply 2–3 coats with a brush, sponge or by spraying. If using tinted products, first test the product on a separate piece of wood to make sure the colour is correct. The final colour of the varnished surface depends on the type and hardness of the wood, its original colour and the number of coats applied. Thin the varnish by approximately 20–30% with water for the first coat. The desired colour and gloss level can usually be achieved after applying two coats. Always work surfaces without interruption, large areas several boards at a time, to achieve an even colour.
Maintenance instructions
If necessary, at the earliest approximately 1 month after varnishing the surface. Lightly clean the surface with a damp cleaning tool, soft brush, sponge or cleaning cloth and a neutral (pH 6–8) detergent. Do not leave the surface wet. Clean heavily soiled surfaces with a mild alkaline (pH 8–10) cleaning solution and, for example, a cleaning cloth or sponge. Rinse the surface carefully.
Please note that quantities are limited and dynamic. At the time of ordering, the item may be out of stock. We will notify you in a timely manner in the event that we are unable to fulfill the order.