Description
Kitchen sink made of graniXit, with high resistance to prolonged exposure to sunlight. Coating with high resistance to aggressive household chemical cleaners. A high degree of antibacterial protection of the coating, thanks to the technology of adding silver ions.
• Pre-set technological holes for a mixer tap and/or liquid soap dispenser, with options for individual drilling at the customer's choice.
• Wide variety of colours: check it out here
• The technology works by adding silver ions. Once applied, they provide constantly active antibacterial protection, and the level of bacteria on the surface decreases by up to 99% within two hours and by up to 80% within the first 15 minutes.
Dimensions:
Width of the bowl: 43 cm.
Length of the bowl: 52 cm.
Length of the sink: 60 cm.
Depth of the bowl: 21 cm.
Width of the sink: 51 cm.
Package contents:
• Italian siphon Ø90 mm with overflow and the option of additionally connecting a washing machine/dishwasher.
• Paper template for cutting the worktop
• Certificates and instructions
Maintenance and care of graniXit sinks
• Do not place hot cookware directly from the hob onto the sink – there is a risk of damaging the coating;
• Do not use abrasive cleaners or sharp cleaning tools.
• Dry the surface with a soft cloth or kitchen paper – this prevents limescale deposits and stains from forming;
Drilling the technological holes for a mixer tap and/or liquid soap dispenser:
• Using a hammer and a punch tool, tap several times on the marked centre;
• Continue tapping from the centre towards the periphery of the hole until it is finally shaped;
• Clean any remaining unevenness along the edge with sandpaper or another suitable abrasive tool.
Installation instructions for composite kitchen sinks
• Trace the outline of the template included with the sink onto the kitchen worktop;
• Cut the worktop on the inner side of the traced outline – so that the line remains visible after cutting;
• If necessary, drill the hole/holes for the mixer tap and/or liquid soap dispenser, following the instructions below;
• Clean the contact surfaces – those of the worktop and of the sink – with alcohol, and apply a thin layer of transparent silicone;
• Place the sink into the opening and press it lightly against the worktop, using some weight;
• Remove the silicone that squeezes out at the edges and clean off any residue;
• Once the silicone has fully dried, remove the weight – the sink is ready for use