IMPREGNANT FOR PINE WOOD 5 L JEGER

Protection up to 5 years

Penetrates deep into the wood structure

Protects against rot, mold, mildew and moss

Weather resistant

Jeger Impregnant is a protective and decorative wood preservative with a matte finish.

Penetrates deep into the wood structure and provides long-lasting protection. Protects the surface from fungi, mold and prevents the appearance of mold and moss. The impregnation is intended for outdoor use.

Substrate preparation: The substrate must be dry, clean and sound. Remove damaged (e.g. peeling and cracked) coatings from previous paints and varnishes. Fill surface defects, level the surface, sand, remove dust and degrease. When applying to new surfaces, lightly sand and clean from dust.

Application: Stir the product before use. Do not dilute with water. Do not mix with other products. Apply with a brush or roller. Can also be applied by spraying (if necessary, the impregnation can be diluted by adding a maximum of 2% water). Apply at temperatures from +8°C to +25°C and a relative humidity of max. 82%. Apply the next layer after at least 2 hours. If you use packages from different production batches, mix them in a larger package to avoid differences in color shade. After finishing painting, wash the tools with warm water. Tip: Apply 1-3 layers on new wood. For renovation, apply 1-2 layers.

*Color shown on packaging is illustrative and may differ from actual product.