Gardena

Basic characteristics Type: Adapter Model: 07115-20 Origin: Germany

Brass nipple 1" Gardena 07261-20 with external pipe thread G 1" at both ends. It is designed for direct connection of two threaded outlets with int...

Gardena 18232-29 1/2" hose repair connector joins the two ends of a garden hose after cutting out the damaged section. The connector fits 13 mm (1/...

The GARDENA 07264-20 reducing nipple is a brass adapter with a 3/4" male thread on one side and a 1" female thread on the other. Key features Typ...

The GARDENA 07103-20 quick-connect coupling is made of brass and is for 25 mm (1") hoses. Key features Type: Adapter Model: 07103-20 Origin: Ge...

The GARDENA 07303-20 tee is for hoses with a diameter of 10 mm and splits one line into two directions. The package contains two pieces. The body i...

The GARDENA 18233-29 hose connector joins two ends of a garden hose 19 mm (3/4"). Both Holland nuts are tightened by hand. Key features Type: Con...

The GARDENA 18215-29 quick connector is for 1/2" (13 mm) and 5/8" (15 mm) hoses. It screws onto the end of the hose and accepts accessories from th...

The GARDENA 07304-20 tee splits a 12 mm hose into a T-shape. The package contains 2 pieces. Key features Model: 07304-20 Diameter: 1.2 cm

The internal thread is G 1" (33.3 mm) and screws directly onto the pump inlet. The design is vacuum-resistant and is equipped with a hose clamp bra...

The GARDENA 18216-29 quick connector is fitted to the end of a 19 mm (3/4") hose and connects it to the other elements of the original GARDENA syst...

The spray is adjusted smoothly from a hard jet to a fine mist with a single turn of the head. Part of the body is made of soft plastic that does no...

The GARDENA 18286-20 connection set contains two tap adapters with 3/4" external thread and one hose connector 1/2". Key features Type: Connectio...

Connector for quick and reliable connection of hose to tap, with Anti-kink technology and stop valve. Suitable for 13 mm (1/2") and 15 mm (5/8") ho...

The GARDENA 02998-20 adapter screws onto taps with a thread from 1/2" to 1" and ends with a quick connector from the GARDENA system. The angled swi...

The GARDENA 07231-20 check valve is made of solid brass and has a G 1" connection thread (33,3 mm). The valve lets water pass in only one direction...

The GARDENA 00938-20 distributor screws directly onto the garden tap and turns one outlet into two. Each of the two outlets has its own tap, with w...

Suction foot valve for a pump with a brass body and a stainless steel strainer for drawing water from a tank, shaft or pond. The connection thread ...

Two-way water distributor that screws onto an outdoor tap with a 33.3 mm (G 1") thread and splits the water to two outlets. Each of the two outlets...

Quick connector with shut-off valve for hose end 19 mm (3/4"), made of metal and plastic. When the accessory is disconnected, the flow stops automa...

Fits mixer taps with thread M 24 x 1 (internal) or M 22 x 1 (external). Not intended for non-pressurised and low-pressure water heaters. Key featur...

Tap faucet with matt chrome-plated metal body for cold water installation indoors and outdoors. It connects to a 26.5 mm (G 3/4") thread and has an...